Gates Fabrication in Dubai for Industrial and Commercial Sites
Gates fabrication in Dubai has to account for size, daily use and weather. An industrial gate may span a wide truck entrance and open dozens of times a day. A pedestrian or service gate is smaller, but it is used just as often. Both have to resist heat, sand and humidity without sagging or seizing.
Leak Lock Insulation Contracting fabricates and installs sliding gates, swing gates and pedestrian gates in mild steel, galvanised steel and aluminium. We work for warehouses, factories, labour accommodations and commercial plots.
When You Need a New or Repaired Gate
For example, clients contact us for one or more of the following reasons.
- Sagging leaves: the gate drags on the ground or will not latch.
- Rusted frames: corrosion at the base and joints.
- Worn rollers or hinges: the gate is heavy or noisy to move.
- Vehicle damage: bent frames and tracks.
- Wider access needed: the entrance is being enlarged.
- New plot or building: an entrance needs securing.
Our Gate Services
Sliding Gates
Track or cantilever gates for wide vehicle entrances.
Swing Gates
In addition, single and double leaf gates for sites and compounds.
Pedestrian Gates
Side gates matched to the main gate or fence.
Automation-Ready Gates
Similarly, gates built to accept a motor fitted by your automation supplier.
Gate Repairs
Rollers, hinges, tracks and frames repaired or renewed.
Posts & Frames
Also, gate posts and support frames fabricated and fixed.
Our Gate Fabrication and Installation Process
Because every site is different, we adapt these steps to your gate fabrication project.
- Site MeasurementBefore anything else, opening width, levels and fixing conditions are checked.
- Design ApprovalThen, style, infill, material and finish are agreed.
- FabricationAfter that, frames are cut, welded and assembled.
- FinishingAs soon as that is done, the gate is galvanised or coated.
- InstallationFinally, posts, track and gate are fitted and adjusted.
Materials & Methods
Gates are made from mild steel sections, galvanised steel or aluminium, with infill of bars, sheet or mesh as chosen. Steel gates are protected by galvanising or a coating system. Rollers, hinges and tracks are sized for the weight and frequency of use.
In short, the work includes the following.
- Mild steel, galvanised steel or aluminium
- Bar, sheet or mesh infill
- Hardware sized for the gate weight
- Galvanised or coated finish
Why Choose Leak Lock for Gate Fabrication
Above all, clients choose us for these reasons.
- Built for daily use: frames and hardware are sized for how often the gate opens.
- Every size of gate: the same care on a truck entrance and a pedestrian gate.
- Site safety: in addition, our team plans lifting, access and supervision for all gate fabrication work.
- Written scope and price: as a result, you know the details, cost and timing of the gate fabrication before fabrication begins.
Areas We Serve
We fabricate and install gates in Dubai, Abu Dhabi, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah. As a result, one team can handle gate fabrication at all of your sites.
Dubai Abu Dhabi Sharjah Ajman Umm Al Quwain Ras Al Khaimah Fujairah
Gate Fabrication FAQs
Questions about steel gates. Also, you can call us with any other question.
Sliding gates suit wide entrances and sloping driveways, and need space along the fence. Swing gates are simpler but need clear space to open.
We build gates ready for automation. The motor and controls are installed by an automation supplier.
Galvanised steel and aluminium resist corrosion best. Mild steel is suitable when properly coated and maintained.
Yes. Sagging, rusted or damaged gates are repaired where practical.
Yes. Fence fabrication and installation is offered so that gate and fence match.
Related Services
Fence Fabrication & Installation
Steel fencing for boundaries, yards and plant areas.
Read MoreBollards Fabrication & Installation
Steel bollards that protect buildings, equipment and walkways.
Read MoreCar Parking Shades
Steel-framed parking shades for offices, schools and yards.
Read More
In addition, you can see all of our waterproofing and fabrication services. Otherwise, contact our team to discuss your project.
Request a Gate Quote
Send the opening width and a photo of the entrance. We will measure on site and quote for a new gate or repair. After that, we will arrange a suitable time to visit.