Metal Grating Fabrication & Installation in UAE

Metal Grating Fabrication & Installation

Metal Grating Fabrication in the UAE for Walkways, Platforms and Trenches

Metal grating fabrication in the UAE supplies the open-grid panels used wherever a solid floor is not wanted. Gratings let water, dust and light pass through while carrying people, trolleys or vehicles. They cover drainage trenches, form platform and walkway floors, and make safe routes across roofs.

Leak Lock Insulation Contracting fabricates gratings to size and carries out steel grating installation in Dubai and across the emirates. We serve factories, warehouses, plants and contractors, and we make the supporting frames and angles as well as the panels.

Open-grid flooring that carries load, drains water and lets light and air through.

Get Free SurveyCall Now

Metal grating fabrication UAE: steel grating panels for a walkway

Where Gratings Are Used

For example, clients contact us for one or more of the following reasons.

  • Drainage trenches: covers that carry traffic while letting water in.
  • Platforms and mezzanines: flooring for plant access levels.
  • Roof walkways: safe routes that protect the roof sheets.
  • Stair treads: slip-resistant treads for industrial stairs.
  • Pits and sumps: removable covers for access.
  • Damaged gratings: bent, corroded or missing panels to replace.

Our Metal Grating Services

  • Walkway Gratings

    Panels for walkways, catwalks and roof access routes.

  • Platform Flooring

    In addition, gratings cut to fit platform frames and around equipment.

  • Trench & Drain Covers

    Covers sized to the trench with seating angles.

  • Grating Stair Treads

    Similarly, treads with nosings for industrial staircases.

  • Support Frames

    Angles, frames and fixings made with the panels.

  • Replacement Panels

    Also, new panels made to match existing openings.

Our Grating Fabrication and Installation Process

Because every site is different, we adapt these steps to your metal grating fabrication project.

  1. MeasurementBefore anything else, openings, spans and loads are recorded on site.
  2. Panel LayoutThen, A panel layout is prepared for approval.
  3. FabricationAfter that, panels and frames are cut, welded and banded.
  4. FinishingAs soon as that is done, steel panels are protected against corrosion.
  5. InstallationFinally, panels are seated, fixed and checked for movement.

Materials & Methods

Gratings are made in mild steel, usually galvanised for corrosion protection, or in stainless steel for wet and hygienic areas. Panel thickness and bar spacing are chosen for the span and the load, whether foot traffic or vehicles.

In short, the work includes the following.

  • Galvanised mild steel gratings
  • Stainless steel gratings for wet areas
  • Bar size chosen for span and load
  • Seating angles and fixing clips

Why Choose Leak Lock for Metal Grating Fabrication

Above all, clients choose us for these reasons.

  • Panels and frames together: everything needed for a complete installation is made by us.
  • Roof walkway experience: gratings on roofs are fixed without compromising waterproofing.
  • Safe installation: in addition, our team plans lifting, access and site safety for all metal grating work.
  • Agreed before we start: as a result, you know the drawings, price and delivery time for your metal grating work in advance.

Areas We Serve

We supply and install metal gratings in Dubai, Abu Dhabi, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah. As a result, one team can handle metal grating fabrication at all of your sites.

Dubai Abu Dhabi Sharjah Ajman Umm Al Quwain Ras Al Khaimah Fujairah

FAQs

Metal Grating Fabrication FAQs

Questions about steel gratings. Also, you can call us with any other question.

It depends on bar size, spacing and span. Tell us whether the grating will carry people or vehicles, and we select the panel accordingly.

The open grid gives good grip and drains water. Serrated bars can be specified for oily or wet areas.

Yes. Panels over pits and trenches are usually made removable for access and held with clips.

Galvanising protects the steel against rust, which matters for gratings exposed to water and weather.

Yes. We measure the opening and make a matching panel.

Related Services

  • Handrail Fabrication & Installation

    Handrails and guard rails for stairs, platforms and roofs.

    Read More
  • Mild Steel Staircase Fabrication

    Access and fire-escape staircases in mild steel.

    Read More
  • Skylight Safety Grill

    Protective grills that guard against falls through skylights.

    Read More

In addition, you can see all of our waterproofing and fabrication services. Otherwise, contact our team to discuss your project.

Request a Grating Quote

Tell us the opening sizes and what the grating must carry. We will confirm the panel type and price. After that, we will arrange a suitable time to visit.

Call +971 52 967 6127WhatsApp Us

Get a Free Quote