Wall Cladding in Dubai for Warehouses, Factories and Commercial Buildings
Wall cladding in Dubai does more than give a building its face. On a steel-framed warehouse the cladding is the wall: it keeps out rain, dust and heat, and it protects the structure behind it. When sheets corrode at the base, panels are dented by forklifts, or fixings work loose, the building starts to leak and lose its insulation value.
Leak Lock Insulation Contracting installs and replaces metal wall cladding and sandwich panel cladding on industrial and commercial buildings. We work for warehouse owners, factory managers and main contractors who need a new elevation clad, an extension matched to the existing building, or damaged warehouse wall cladding replaced without shutting the site.
Common Wall Cladding Problems We Fix
For example, clients contact us for one or more of the following reasons.
- Corroded sheet bases: rust where cladding meets the ground or plinth.
- Impact damage: dented or torn panels near loading bays and traffic routes.
- Leaking joints: water tracking in at laps, corners and around openings.
- Loose or missing fixings: sheets that rattle or lift in strong wind.
- Faded or mismatched panels: elevations that no longer look presentable.
- Heat gain: single skin walls that make the interior hard to cool.
Our Wall Cladding Services
Metal Sheet Cladding
Profiled single skin sheets fixed to wall rails for stores, workshops and boundary buildings.
Sandwich Panel Cladding
In addition, insulated panels that form the wall and the insulation in one layer for cooled spaces.
Warehouse Wall Cladding
Full elevations clad for new sheds, extensions and partition walls inside warehouses.
Cladding Replacement
Similarly, damaged or rusted panels removed and replaced to match the surrounding wall.
Flashings & Trims
Corner, base, head and opening flashings fabricated and fitted to close every edge.
Openings & Alterations
Also, cladding cut and trimmed for new doors, louvres, windows and service entries.
Our Wall Cladding Installation Process
Because every site is different, we adapt these steps to your wall cladding project.
- Site SurveyBefore anything else, we measure the elevations, check the supporting rails and record access needs.
- Panel SelectionThen, sheet profile, panel thickness and colour are agreed to suit the building.
- PreparationAfter that, old cladding is removed where required and wall rails are checked or repaired.
- InstallationAs soon as that is done, panels are lifted, aligned and fixed, with laps and joints sealed as work proceeds.
- Flashings & HandoverFinally, trims are fitted, the wall is inspected with you and the area is cleared.
Materials & Methods
Cladding type is chosen to suit the use of the building. Single skin metal sheets are the economical option for unconditioned space. Sandwich panels, with an insulating core between two metal skins, suit cooled warehouses and production areas. Fixings and sealants are selected to match the panel system.
In short, the work includes the following.
- Profiled metal sheets for single skin walls
- Insulated sandwich panels for cooled buildings
- Purpose-made flashings and trims
- Sealed laps and correctly spaced fixings
Why Choose Leak Lock for Wall Cladding
Above all, clients choose us for these reasons.
- Building envelope experience: we clad walls and waterproof roofs, so junctions between them are done properly.
- Fabrication in-house: flashings and supports are made by our own fabrication team.
- Safe access: work at height is planned with suitable lifting and access equipment.
- Clear programme: you receive a written scope, price and timeline before we begin.
Areas We Serve
We supply and install wall cladding for industrial and commercial buildings in Dubai, Abu Dhabi, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah. As a result, one team can handle wall cladding at all of your sites.
Dubai Abu Dhabi Sharjah Ajman Umm Al Quwain Ras Al Khaimah Fujairah
Wall Cladding FAQs
Answers about metal wall cladding in the UAE and sandwich panel cladding. Also, you can call us with any other question.
Single skin cladding is one profiled metal sheet. Sandwich panel cladding has two metal skins with an insulating core between them, so it reduces heat gain and is the usual choice for air-conditioned or temperature-controlled buildings.
Yes. Where the rest of the wall is sound we remove and replace the affected panels and match the profile and colour as closely as available stock allows.
In most cases, yes. We work elevation by elevation and agree safe zones with your operations team so loading and storage can continue.
Yes. Corner pieces, base trims and flashings around doors and louvres are fabricated to site measurements so the wall is closed at every edge.
It depends on wall area, height and access. After the survey we give you a programme along with the quotation.
Related Services
Roof Panel Replacement
Replacement of damaged roof sheets and wall panels.
Read MoreWarehouse Refurbishment
Repairs that bring a tired warehouse back to sound condition.
Read MoreSheet & Sandwich Panel Replacement
Replacement of damaged single skin sheets and sandwich panels.
Read More
In addition, you can see all of our waterproofing and fabrication services. Otherwise, contact our team to discuss your project.
Get a Wall Cladding Quote
Share your drawings or the wall sizes and location. We will survey the building and price the cladding work clearly. After that, we will arrange a suitable time to visit.