Metal Roof Cladding in Dubai for New Roofs and Re-Roofing
Metal roof cladding in Dubai is the installation of profiled metal sheets or insulated panels as the roof covering of a steel building. It is the right step when a roof is being built new, extended, or when existing sheets are so corroded that sealing them is no longer worthwhile. A roof that is clad carefully, with tight laps and correct fixings, starts its life watertight.
Leak Lock Insulation Contracting installs roof cladding on warehouses, factories, workshops and sheds, and seals laps, ridges and flashings as part of the same job. If your existing roof is sound and only leaking at joints, our metal roof waterproofing service is the more economical option, and we will tell you so.
When Roof Cladding Is the Right Choice
For example, clients contact us for one or more of the following reasons.
- New building or extension: A steel frame needs its roof covering.
- Widespread corrosion: sheets rusted across the roof, not just at fixings.
- End of service life: repairs are becoming frequent and costly.
- Insulation upgrade: A single skin roof is being changed to insulated panels.
- Storm damage: large areas of sheeting lost or deformed.
- Change of building use: the roof specification no longer suits the operation.
Our Metal Roof Cladding Services
New Roof Sheeting
Profiled metal sheets fixed to purlins on new structures.
Re-Roofing
In addition, old sheets stripped and replaced section by section.
Over-Cladding
A new roof layer installed above the existing sheets where the structure allows.
Insulated Panel Roofing
Similarly, sandwich panels fitted for cooled or temperature-sensitive buildings.
Ridge, Eaves & Flashings
All trims fabricated and fitted to close the roof edges.
Lap & Fixing Sealing
Also, laps and screw lines sealed as the roof is installed.
Our Roof Cladding Process
Because every site is different, we adapt these steps to your metal roof cladding project.
- Survey & MeasurementBefore anything else, the structure, purlins and roof dimensions are checked.
- SpecificationThen, sheet profile, thickness, finish and insulation are agreed.
- RemovalAfter that, existing sheets are stripped where the roof is being replaced.
- InstallationAs soon as that is done, new sheets or panels are fixed with correct laps and fasteners.
- Sealing & HandoverFinally, flashings are fitted, laps sealed and the roof inspected.
Materials & Methods
Sheet type is selected with you: single skin profiled sheets for unconditioned buildings, or sandwich panels where insulation is required. Fasteners with sealing washers are used throughout, and laps, ridges and flashings are sealed with EPDM membrane so that the new roof is watertight on completion.
In short, the work includes the following.
- Profiled metal roof sheets or sandwich panels
- Fasteners with sealing washers at correct spacing
- Fabricated ridge, eaves and wall flashings
- EPDM-sealed laps and details
Why Choose Leak Lock for Metal Roof Cladding
Above all, clients choose us for these reasons.
- Cladding and waterproofing by one contractor: the installers are also the people who seal roofs for a living.
- Repair-or-replace honesty: we recommend cladding only when sealing will not do the job.
- Safe working at height: in addition, our team uses fall protection and controlled roof access for all metal roof cladding work.
- Clear paperwork: as a result, you know the scope, price and warranty terms for the metal roof cladding before we start.
Areas We Serve
We install metal roof cladding in Dubai, Abu Dhabi, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah. As a result, one team can handle metal roof cladding at all of your sites.
Dubai Abu Dhabi Sharjah Ajman Umm Al Quwain Ras Al Khaimah Fujairah
Metal Roof Cladding FAQs
Questions about re-roofing and roof cladding. Also, you can call us with any other question.
Cladding is the installation of the roof sheets themselves. Waterproofing seals the joints and details of sheets that are already in place. A sound roof needs waterproofing; a worn-out roof needs new cladding.
Yes. The roof is replaced in sections so that only a limited area is open at any time, and each section is closed the same day wherever possible.
Over-cladding installs a new roof layer above the existing one, which avoids opening the building. It depends on the capacity of the structure, which we check at the survey.
Yes. When sheets are removed, the purlins are inspected, and any that are corroded can be replaced at the same time.
Yes. Wall cladding in metal sheet or sandwich panels is offered as a separate service.
Related Services
Metal Roof Waterproofing
Sealing of laps, screws and ridges on metal sheet and sandwich panel roofs.
Read MoreWall Cladding
Metal and sandwich panel cladding for warehouse and factory walls.
Read MoreRoof Panel Replacement
Replacement of damaged roof sheets and wall panels.
Read More
In addition, you can see all of our waterproofing and fabrication services. Otherwise, contact our team to discuss your project.
Plan Your Roof Cladding
Share the roof size or drawings. We will survey the building and quote for new cladding or re-roofing. After that, we will arrange a suitable time to visit.